TLE4906-2K Datasheet, PDF (7/16 Pages) Infineon Technologies AG – High Precision Hall-Effect Switch

2.4
Block Diagram
TLE4906-2K
Functional Description
V_DD
Voltage Regulator
reverse polarity protected
Bias and
Compensation
Circuits
Oscillator
and
Sequencer
Q
Ref
Chopped
Hall Probe
Amplifier
Low
Pass
Filter
Comparator
with
Hysteresis
GND
Figure 2 Functional Block Diagram
2.5
Functional Block Description
The chopped Hall IC Switch comprises a Hall probe, bias generator, compensation circuits, oscillator and output
transistor.
The bias generator provides currents for the Hall probe and the active circuits. Compensation circuits stabilize the
temperature behavior and reduce technology variations.
The Active Error Compensation rejects offsets in signal stages and the influence of mechanical stress to the Hall
probe caused by molding and soldering processes and other thermal stresses in the package.
This chopper technique together with the threshold generator and the comparator ensure high accurate magnetic
switching points.
Datasheet
5
Rev 1.0, 2010-12