TLE4418G Datasheet, PDF (7/10 Pages) Infineon Technologies AG – Triple Voltage Regulator

TLE 4418 G
Electrical Characteristics (cont’d)
V_CC=5.0V; V_DD=12.0V; 0 °C < T_j < 125 °C; unless otherwise specified; all voltages with
respect to ground; positive current defined flowing into pin
Parameter
Symbol Limit Values Unit Test Condition
min. typ. max.
Supply Voltage
Current Consumption
I_CC
Current Consumption
I_DD
–
1.75 2.6 mA
–
1.80 3.0 mA
1) _{measured where the output voltage has dropped 1% below its nominal value}
I_Q2=I_Q3=I_Q8=100µA
I_Q2=I_Q3=I_Q8=100µA
Application Information
The output capacitors C_Q2, C_Q3 and C_Q8 are required with a capacitance of C_Q2/3/8³2.2 µF
and an ESR £ 4 W in order to maintain the stability of the regulation loop under all
operating conditions. The output capacitors should be placed nearby the corresponding
output voltage pin. For the Inputs V_CC and V_DD a ceramic capacitor in the range of
100 nF... 470 nF connected to GND close to the pins is needed in order compensate line
influences.
Target Data Sheet Rev. 0.1
7
2001-12-10