BTS3205N Datasheet, PDF (7/21 Pages) Infineon Technologies AG – Smart Low-Side Power Switch

Smart Low-Side Power Switch
BTS3205N
General Product CharacteristicsAbsolute Maximum Ratings
4
General Product Characteristics
4.1
Absolute Maximum Ratings
Absolute Maximum Ratings ¹⁾
T_j = -40 °C to +150 °C; all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Pos. Parameter
Symbol Limit Values Unit Test Conditions
Min. Max.
Voltages
4.1.1 Drain voltage
4.1.2 Input Voltage
4.1.3 Input Current
4.1.4
4.1.5 Drain Current
Energies
V_D
–
42 V
2) _{VIN = 0 V, ID = 10 mA}
V_IN
-0.2 10 V
–
I_IN
self limited mA -0.2 V < V_IN < 10 V
-2
2
mA V_IN < -0.2 V
or V_IN > 10 V
I_D
–
600 mA ³⁾ T_j = 25 °C
4.1.6 Unclamped single pulse inductive energy E_AS
0
65 mJ I_D = 350 mA;
single pulse
V_bb = 28 V;
T_J(start) = 85 °C
4.1.7 Unclamped single pulse inductive energy
single pulse
–
30 mJ I_D = 250 mA;
V_bb = 28 V;
T_J(start) = 150 °C
4.1.8 Unclamped repetitive pulse inductive
E_AR
0
18 mJ I_D = 200 mA;
energy 1×10⁴ cycles
V_bb = 13.5 V;
T_J(start) = 150 °C
4.1.9
Unclamped repetitive pulse inductive
energy 1×10⁶ cycles
4.1.10 Total Power Dissipation
P_tot
–
13 mJ I_D = 170 mA;
V_bb = 13.5 V;
T_J(start) = 150 °C
–
0.78 W
4) _{Ta = 85 °C}
Temperatures
4.1.11 Operating temperature
T_J
-40 +150 °C –
4.1.12 Storage temperature
T_stg
-55 +150 °C –
ESD Susceptibility
4.1.13 Electrostatic discharge voltage ⁵⁾
V_ESD
-2
2
kV IN Pin
R = 1.5 k;
C = 100 pF;
T_J = 25 °C
1) Not subject to production test, specified by design.
2) Active clamped.
3) Internally limited.
4) Device mounted on PCB according EIA/JEDEC standard JESD51-7 (4-layer FR4, 76.2 mm × 114.3 mm with buried
planes). PCB is mounted vertical without blown air.
5) ESD susceptibility HBM according to EIA/JESD 22-A 114B, section 4.
Data Sheet
7
Rev. 1.0, 2008-09-25