TLE4998S3 Datasheet, PDF (6/39 Pages) Infineon Technologies AG – Programmable Linear Hall Sensor

Programmable Linear Hall Sensor
TLE4998S3
TLE4998S4
1
Overview
1.1
Features
• Single Edge Nibble Transmission (SENT) open-drain
output signal (SAE J2716)
• 20-bit Digital Signal Processing (DSP)
• Digital temperature compensation
• 16-bit overall resolution
• Operates within automotive temperature range
• Low drift of output signal over temperature and lifetime
• Programmable parameters stored in EEPROM with
single-bit error correction:
– SENT unit time
– Magnetic range and sensitivity (gain), polarity of the
output slope
– Offset
– Bandwidth
– Clamping levels
– Customer temperature compensation coefficients
– Memory lock
• Re-programmable until memory lock
• Single supply voltage 4.5 - 5.5 V (4.1 - 16 V in extended range)
• Operation between -200 mT and +200 mT within three ranges
• Reverse-polarity and overvoltage protection for all pins
• Output short-circuit protection
• On-board diagnostics (overvoltage, EEPROM error, start up)
• Output of internal magnetic field values and temperature
• Programming and operation of multiple sensors with common power supply
• Two-point calibration of magnetic transfer function without iteration steps
• High immunity against mechanical stress, EMC, ESD
Type
TLE4998S3
TLE4998S4
Data Sheet
Marking
4998S3
4998S4
Ordering Code
SP412108
SP412110
6
Package
PG-SSO-3-10
PG-SSO-4-1
V 1.0, 2008-07