TLE4266_08 Datasheet, PDF (6/14 Pages) Infineon Technologies AG – 5 V/10 V Low Drop Voltage Regulator Output voltage 5 V or 10 V

TLE 4266
Table 4
Characteristics (TLE 4266 GSV10)
V_I = 13.5 V; -40 °C ≤ T_j ≤ 125 °C
Parameter
Symbol
Limit Values Unit Test Condition
Min. Typ. Max.
Output voltage
Output voltage
Output-current limitation
Current consumption
I_q = I_I - I_Q
Current consumption
I_q = I_I - I_Q
Current consumption
I_q = I_I - I_Q
Drop voltage
Load regulation
Line regulation
Power supply ripple
rejection
Inhibit
V_Q
V_Q
I_Q
I_q,off
I_q
I_q
V_DR
∆V_Q,Lo
∆V_Q,Li
PSRR
9.8 10 10.2 V
5 mA ≤ I_Q ≤ 100 mA
11 V ≤ V_I ≤ 21 V
9.8 10 10.2 V
1 mA ≤ I_Q ≤ 50 mA
11 V ≤ V_I ≤ 28 V
120 150 200 mA –
–
–
10 µA V_INH = 0 V;
T_j ≤ 100 °C
– 350 500 µA I_Q < 1 mA
Inhibit ON
– 7 15 mA I_Q < 100 mA
Inhibit ON
–
0.28 0.5 V
I_Q = 100 mA¹⁾
-80 –
80 mV I_Q = 5 to 100 mA
V_I = 11 V
-30 5
30 mV V_I = 11 V to 28 V
I_Q = 5 mA
– 54 – dB f_r = 100 Hz,
V_r = 0.5 Vpp
Inhibit on voltage
V_{INH, on} 3.5 –
–
V
–
Inhibit off voltage
V_{INH, off} –
–
0.8 V
–
Inhibit current
I_INH
5
12 25 µA V_INH = 5 V
1) Drop voltage = V_I - V_Q measured when the output voltage V_Q has dropped 100 mV from the nominal value.
Data Sheet
6
Rev. 2.5, 2008-03-10