TLE4266-2 Datasheet, PDF (6/11 Pages) Infineon Technologies AG – Low Drop Voltage Regulator

TLE 4266-2
Table 3
Characteristics (cont’d)
V_I = 13.5 V; V_INH = 5 V; -40 °C ≤ T_j ≤ 125 °C unless otherwise specified
Parameter
Symbol Limit Values Unit Test Condition
Min. Typ. Max.
Power Supply Ripple
Rejection
PSRR –
68 –
Output Capacitor
Inhibit
C_Q
10 – –
dB f_r = 100 Hz;
V_r = 0.5 Vpp
µF ESR ≤ 4 Ω at 10 kHz
Inhibit on voltage
V_{INH, on} 3.5 –
–
V–
Inhibit off voltage
V_{INH, off} –
–
0.8 V –
Inhibit current
I_INH
–4 8
µA V_INH = 5 V
Pull-down resistor
R_INH
– 1.0 –
MΩ see I_INH
1) Drop voltage = V_I - V_Q (measured when the output voltage V_Q has dropped 100 mV from the nominal value
obtained at V_I = 13.5 V).
2) Drop voltage = V_I - V_Q (measured when the output voltage V_Q has dropped 100 mV from the nominal value
obtained at V_I = 13.5 V).
Data Sheet
6
Rev. 1.2, 2004-01-01