TLE4263-2ES Datasheet, PDF (6/22 Pages) Infineon Technologies AG – 5-V Low Dropout Voltage Regulator

4
General Product Characteristics
TLE4263-2ES
General Product Characteristics
4.1
Absolute Maximum Ratings
Absolute Maximum Ratings ¹⁾
T_j = -40 °C to +150 °C; all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Pos.
Parameter
Symbol
Limit Values
Unit
Min.
Max.
Input I, Input INH
4.1.1 Input Voltage
Reset Output RO, Reset Delay D
V_I, V_INH -42
45
V
4.1.2 Voltage
Reset Threshold RADJ
V_R, V_D -0.3
42
V
4.1.3 Voltage
Output Q
V_RADJ
-0.3
6
V
4.1.4 Voltage
Watchdog W
V_Q
-0.3
7
V
4.1.5 Voltage
Temperature
V_W
-0.3
6
V
4.1.6 Junction Temperature
4.1.7 Storage Temperature
ESD Susceptibility
4.1.8
Human Body Model (HBM)²⁾
4.1.9
Charged Device Model (CDM)³⁾
T_j
–
T_stg
-50
Voltage -
Voltage -
150
°C
150
°C
2
kV
1
kV
1) not subject to production test, specified by design
2) ESD HBM Test according JEDEC JESD22-A114
3) ESD CDM Test according AEC/ESDA ESD-STM5.3.1-1999
Conditions
–
–
–
–
–
–
–
–
–
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
Data Sheet
6
Rev. 1.0, 2008-04-21