TLE4254 Datasheet, PDF (6/21 Pages) Infineon Technologies AG – High Accuracy Low Dropout Voltage Tracking Regulator

TLE4254
General Product Characteristics
4
General Product Characteristics
4.1
Absolute Maximum Ratings
Absolute Maximum Ratings ¹⁾
-40 °C ≤ T_j ≤ 150 °C; all voltages with respect to ground (unless otherwise specified).
Not subject to production test; specified by design.
Pos.
Parameter
Symbol Limit Values Unit Conditions
Min. Max.
Voltages
4.1.1 Input voltage
V_I
-20
45
V–
4.1.2 Adjust / Enable input voltage
V_ADJ/EN
-20
45
V–
4.1.3 Output voltage
V_Q
-5
45
V–
4.1.4
Feedback input voltage (version V_FB
GA / EJ A)
-20
45
V–
4.1.5 Status output voltage (version
V_ST
GS / EJ S)
-0.3 7
V–
Temperatures
4.1.6 Junction Temperature
T_j
-40
150 °C –
4.1.7 Storage Temperature
T_stg
-50
150 °C –
ESD Rating
4.1.8 ESD Susceptibility
|V_ESD,HBM| 4
4.1.9
|V_ESD,CDM| 1
1) Not subject to production test, specified by design.
–
kV HBM ²⁾
–
kV CDM ³⁾
2) ESD susceptibility Human Body Model “HBM” according to AEC-Q100-002 - JESD22-A114
3) ESD susceptibility Charged Device Model “CDM” according to ESDA STM5.3.1
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
Data Sheet
6
Rev. 1.2, 2009-11-18