TLE4247 Datasheet, PDF (6/14 Pages) Infineon Technologies AG – Constant Current Relay Driver

4
General Product Characteristics
TLE4247
General Product Characteristics
4.1
Absolute Maximum Ratings
Absolute Maximum Ratings ¹⁾
T_j = -40 °C to +150 °C; all voltages with respect to CGND, positive current flowing into pin
(unless otherwise specified)
Pos.
Parameter
Symbol
Limit Values Unit Conditions
Min.
Max.
Pin S (IC Supply)
4.1.1 Voltage at pin S
4.1.2 Current into pin S
Pin IN (Relay Coil Current Input)
V_S
-0.3
45
I_S
-400
–
V
V_S > V_IN or V_IN open;
I_S externally not limited
mA V_S < -0.3V
4.1.3 Voltage at pin IN
4.1.4 Current into pin IN
Pin D (Delay)
V_IN
-0.3
30
I_IN
-250
400
V
V_S > V_IN or V_S open;
I_IN externally not limited
mA –
4.1.5 Voltage at pin D
Temperatures
V_D
-0.3
6.8
V
4.1.6 Junction Temperature
T_j
-40
150
°C –
4.1.7 Storage Temperature
T_stg
-55
150
°C –
ESD Susceptibility
4.1.8 ESD Resistivity to CGND
V_ESD,HBM -4
4
4.1.9
ESD Resistivity middle pins
V_ESD,CDM -1.5
1.5
1) Not subject to production test, specified by design.
kV HBM²⁾
kV CDM³⁾
2) ESD susceptibility, Human Body Model “HBM” according to EIA/JESD 22-A114B
3) ESD susceptibility, Charged Device Model “CDM” according to EIA/JESD22-C101 or ESDA STM5.3.1
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
Datasheet
6
Rev. 1.01, 2010-05-04