TLE4296-2_14 Datasheet, PDF (5/12 Pages) Infineon Technologies AG – Low Drop Voltage Regulator

TLE4296-2
General Product Characteristics
4
General Product Characteristics
4.1
Absolute Maximum Ratings
Absolute Maximum Ratings ¹⁾
T_j = -40 °C to +150 °C; all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Pos.
Parameter
Symbol
Limit Values
Unit Conditions
Min.
Max.
Input
4.1.1
4.1.2
Output
Voltage
Current
V_I
-42
45
V–
I_I
–
–
mA ²⁾
4.1.3
4.1.4
Inhibit
Voltage
Current
V_Q
-0.3
30
V–
I_Q
–
–
mA ²⁾
4.1.5
4.1.6
4.1.7
Voltage
Current
Current
Temperatures
V_INH
-42
45
V–
I_INH
-500
2)
μA –
I_INH
-5
5
mA -0.3 V ≤ V_I ≤ 45 V ;
t_p < 1 ms
4.1.8 Junction Temperature
4.1.9 Storage Temperature
Thermal Resistance
T_j
-40
150
°C –
T_stg
-50
150
°C –
4.1.10
4.1.11
Junction Pin
Junction ambient³⁾
R_thj-pin
–
R_thja
–
30
K/W Measured to pin 5
179
K/W Zero airflow ;
zero heat sink area
1) Not subject to production test, specified by design.
2) Internally limited
3) Worst case regarding peak temperature
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
Data Sheet
5
Rev. 1.13, 2014-03-18