TLE42754 Datasheet, PDF (5/24 Pages) Infineon Technologies AG – Low Dropout Linear Fixed Voltage Regulator

TLE42754
Pin Configuration
3
Pin Configuration
3.1
Pin Assignment TLE42754D (PG-TO252-5) and TLE42754G (PG-TO263-5)
P-TO252-5 (D-PAK)
GND
1
5
Ι RO D Q
AEP02580
P-TO263-5 (D²-PAK)
Ι GND Q
RO D
IEP02528
Figure 2 Pin Configuration (top view)
3.2
Pin Definitions and Functions TLE42754D (PG-TO252-5) and TLE42754G (PG-
TO263-5)
Pin Symbol
1
I
2
RO
3
GND
4
D
5
Q
TAB GND
Function
Input
for compensating line influences, a capacitor to GND close to the IC terminals is
recommended
Reset Output
open collector output; external pull-up resistor to a positive potential required;
leave open if the reset function is not needed
TLE42754G (PG-TO263-5) only: Ground
internally connected to tab
Reset Delay Timing
connect a ceramic capacitor to GND for adjusting the reset delay time;
leave open if the reset function is not needed
Output
block to GND with a capacitor close to the IC terminals, respecting the values given
for its capacitance C_Q and ESR in the table “Functional Range” on Page 7
Ground
connect to heatsink area
Data Sheet
5
Rev. 1.0, 2008-05-29