TLE42644_14 Datasheet, PDF (5/15 Pages) Infineon Technologies AG – Very Low Dropout Voltage

4
General Product Characteristics
TLE42644
General Product Characteristics
4.1
Absolute Maximum Ratings
Table 1 Absolute Maximum Ratings¹⁾
T_j = -40 °C to 150 °C; all voltages with respect to ground, (unless otherwise specified)
Parameter
Symbol
Values
Unit Note /
Min. Typ. Max.
Test Condition
Input I
Voltage
Output Q
V_I
-30 –
45
V
–
Voltage
Temperature
V_Q
-0.3 –
32
V
–
Junction temperature
Storage temperature
ESD Susceptibility
T_j
-40 –
150 °C –
T_stg
-50 –
150 °C –
ESD Absorption
V_ESD,HBM
-3
–
3
kV Human Body
Model (HBM)²⁾
ESD Absorption
V_ESD,CDM -1500 –
1500 V
Charge Device
Model (CDM)³⁾ at
all pins
1) not subject to production test, specified by design
2) ESD susceptibility Human Body Model “HBM” according to AEC-Q100-002 - JESD22-A114
3) ESD susceptibility Charged Device Model “CDM” according to ESDA STM5.3.1
Number
P_4.1.1
P_4.1.2
P_4.1.3
P_4.1.4
P_4.1.5
P_4.1.6
Notes
1. Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
2. Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are not
designed for continuous repetitive operation.
4.2
Functional Range
Table 2 Functional Range
Parameter
Symbol
Input voltage
V_I
Output Capacitor’s
C_Q
Requirements for Stability
Min.
5.5
10
Values
Typ. Max.
–
40
–
–
Unit
V
µF
Note /
Test Condition
–
–
Number
P_4.2.1
P_4.2.2
Data Sheet
5
Rev. 1.1, 2014-07-03