TLE42644 Datasheet, PDF (5/12 Pages) Infineon Technologies AG – Low Dropout Fixed Voltage Regulator

TLE42644
General Product Characteristics
4
General Product Characteristics
4.1
Absolute Maximum Ratings
Absolute Maximum Ratings¹⁾
T_j = -40 °C to 150 °C; all voltages with respect to ground, (unless otherwise specified)
Pos.
Parameter
Symbol
Limit Values
Unit Test Condition
Min.
Max.
Input I
4.1.1 Voltage
Output Q
V_I
-30
45
V
–
4.1.2 Voltage
Temperature
V_Q
-0.3
32
V
–
4.1.3 Junction temperature
4.1.4 Storage temperature
ESD Susceptibility
T_j
-40
150
°C –
T_stg
-50
150
°C –
4.1.5 ESD Absorption
V_ESD,HBM
-3
3
kV Human Body Model
(HBM)²⁾
4.1.6
V_ESD,CDM -1500
1500
V
Charge Device
Model (CDM)³⁾ at all
pins
1) not subject to production test, specified by design
2) ESD susceptibility Human Body Model “HBM” according to AEC-Q100-002 - JESD22-A114
3) ESD susceptibility Charged Device Model “CDM” according to ESDA STM5.3.1
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
4.2
Functional Range
Pos.
Parameter
4.2.1 Input voltage
4.2.2
4.2.3
Output Capacitor’s
Requirements for Stability
4.2.4 Junction temperature
1) relevant ESR value at f = 10 kHz
Symbol
V_I
C_Q
ESR(C_Q)
T_j
Limit Values
Min.
Max.
5.5
40
10
–
–
2
-40
150
Unit Remarks
V–
µF –
Ω
1)
°C –
Note: Within the functional or operating range, the IC operates as described in the circuit description. The electrical
characteristics are specified within the conditions given in the Electrical Characteristics table.
Data Sheet
5
Rev. 1.01, 2009-09-30