TLE42344G Datasheet, PDF (5/13 Pages) Infineon Technologies AG – Low Dropout Linear Voltage Regulator

TLE42344G
General Product Characteristics
4
General Product Characteristics
4.1
Absolute Maximum Ratings
Absolute Maximum Ratings ¹⁾
T_j = -40 °C to +150 °C; all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Pos.
Parameter
Symbol
Limit Values Unit
Min.
Max.
Input
4.1.1 Input voltage
Output
V_I
-30
45
V
4.1.2 Output voltage
Temperatures
V_Q
-1
32
V
4.1.3 Junction Temperature
4.1.4 Storage Temperature
ESD Susceptibility
T_j
-40
150
°C
T_stg
-50
150
°C
4.1.5 ESD Resistivity to GND
V_ESD
-4
4
kV
4.1.6 ESD Resistivity to GND
V_ESD
1) Not subject to production test, specified by design.
-1.5
1.5
kV
2) ESD susceptibility, HBM according to EIA/JESD 22-A114B
3) ESD susceptibility, Charged Device Model “CDM” EIA/JESD22-C101 or ESDA STM5.3.1
Conditions
–
–
–
–
HBM²⁾
CDM³⁾
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
4.2
Functional Range
[
Table 1
Functional Range
Pos. Parameter
4.2.1
4.2.2
Input Voltage
Junction Temperature
Symbol
V_I
T_j
Limit Values
Min.
Max.
5.5
45
-40
150
Unit Conditions
V
°C
–
Note: Within the functional or operating range, the IC operates as described in the circuit description. The electrical
characteristics are specified within the conditions given in the Electrical Characteristics table.
Data Sheet
5
Rev. 1.0, 2010-02-08