V23818-M305-B57 Datasheet, PDF (4/19 Pages) Infineon Technologies AG – SFP - Small Form-factor Pluggable Multimode 850 nm 2.125 and 1.0625 Gbit/s Fibre Channel 1.25 Gigabit Ethernet Transceiver with LC™ Connector

V23818-M305-B57
Description
Description
The Infineon Fibre Channel / Gigabit Ethernet multimode transceiver – part of Infineon
Small Form Factor transceiver family – is based on the Physical Medium Depend (PMD)
sublayer and baseband medium, type 1000 Base-SX (short wavelength) as specified in
IEEE Std 802.3, Fibre Channel
FC-PI (Rev. 13) 200-M5-SN-I, 200-M6-SN-I,
FC-PI (Rev. 13) 100-M5-SN-I, 100-M6-SN-I.
The appropriate fiber optic cable is 62.5 µm or 50 µm multimode fiber with LC™
connector.
Link Length as Defined by IEEE and Fibre Channel Standards
Fiber Type
Reach
min.¹⁾
max.²⁾
Unit
at 1.0625 Gbit/s
50 µm, 2000 MHz*km
0.5
860
meters
50 µm, 500 MHz*km
0.5
500
50 µm, 400 MHz*km
0.5
450
62.5 µm, 200 MHz*km
0.5
300
62.5 µm, 160 MHz*km
0.5
250
at 1.25 Gbit/s
50 µm, 500 MHz*km
2
550
meters
50 µm, 400 MHz*km
2
500
62.5 µm, 200 MHz*km
2
275
62.5 µm, 160 MHz*km
2
220
at 2.125 Gbit/s
50 µm, 2000 MHz*km
0.5
500
meters
50 µm, 500 MHz*km
0.5
300
50 µm, 400 MHz*km
0.5
260
62.5 µm, 200 MHz*km
0.5
150
62.5 µm, 160 MHz*km
0.5
120
1) _{Minimum reach as defined by IEEE and Fibre Channel Standards. A 0 m link length (loop-back connector) is}
supported.
2) _{Maximum reach as defined by IEEE and Fibre Channel Standards. Longer reach possible depending upon link}
implementation.
Data Sheet
4
2003-04-25