V23818-K305-L17 Datasheet, PDF (4/16 Pages) Infineon Technologies AG – Small Form Factor Multimode 850 nm 1.0625 GBd Fibre Channel 1.25 Gigabit Ethernet Transceiver 2x5 Pinning with LC™ Connector

V23818-K305-Lxx
Description
Description
The Infineon Gigabit Ethernet multimode transceiver – part of Infineon Small Form
Factor transceiver family – is based on and compliant to the Physical Medium Depend
(PMD) sublayer and baseband medium, type 1000-Base-SX (short wavelength) as
specified in IEEE 802.3 and Fibre Channel FC-PI Rev. 13 100-M5-SN-I, 100-M6-SN-I.
The appropriate fiber optic cable is 62.5 µm or 50 µm multimode fiber with LC™
connector.
Operating Range over each Optical Fiber Type
Fiber Type
min.
62.5 micron MMF
0.5
50.0 micron MMF
0.5
Limit Values
typ.
max.
2 to 300 400
2 to 550 700
Unit
meters
The Infineon Gigabit Ethernet multimode transceiver is a single unit comprised of a
transmitter, a receiver, and an LC™ receptacle. This design frees the customer from
many alignment and PC board layout concerns.
This transceiver supports the LC™ connectorization concept. It is compatible with RJ-45
style backpanels for high end Data Com and Telecom applications while providing the
advantages of fiber optic technology.
The module is designed for low cost SAN, LAN, WAN, Fibre Channel and Gigabit
Ethernet applications. It can be used as the network end device interface in mainframes,
workstations, servers, and storage devices, and in a broad range of network devices
such as bridges, routers, hubs, and local and wide area switches.
This transceiver operates at 1.0625 and 1.25 Gbit/s from a single power supply (+3.3 V).
The full differential data inputs and outputs are LVPECL compatible.
Data Sheet
4
2003-01-22