ITS5215L Datasheet, PDF (4/13 Pages) Infineon Technologies AG – Smart High-Side Power Switch for Industrial Applications

Thermal Characteristics
Parameter and Conditions
Symbol
Thermal resistance
junction - Case⁶⁾
junction – ambient⁶⁾
@ 6 cm² cooling area
each channel:
one channel active:
all channels active:
R_thjC
R_thja
PROFET® ITS 5215L
Values
Unit
min typ max
--
--
--
--
-- 45
-- ₄₀
5 K/W
--
--
--
Electrical Characteristics
Parameter and Conditions, each of the four channels
at Tj = -40...+150°C, V_bb = 12 V unless otherwise specified
Symbol
Values
Unit
min typ max
Load Switching Capabilities and Characteristics
On-state resistance (Vbb to OUT); IL = 2 A
each channel, T_j = 25°C: R_ON
T_j = 150°C:
two parallel channels, T_j = 25°C:
see diagram, page 10
Nominal load current
one channel active: I_L(NOM)
two parallel channels active:
Device on PCB⁶⁾, T_a = 85°C, T_j ≤ 150°C
Output current while GND disconnected or pulled up⁷⁾; I_L(GNDhigh)
Vbb = 32 V, V_IN = 0,
see diagram page 8
Turn-on time⁸⁾
IN
to 90% V_OUT: t_on
Turn-off time
IN
to 10% V_OUT: t_off
R_L = 12 Ω
Slew rate on ⁸⁾
Slew rate off ⁸⁾
10 to 30% V_OUT, R_L = 12 Ω: dV/dt_on
70 to 40% V_OUT, R_L = 12 Ω: -dV/dt_off
-- 70 90 mΩ
-- 140 180
-- _{35 45}
3.7 4.7
7.4 9.5
-- A
--
--
2 mA
-- 100 250 µs
-- 100 270
0.2
-- 1.0 V/µs
0.2
-- 1.1 V/µs
6) _{Device on 50mm*50mm*1.5mm epoxy PCB FR4 with 6cm}2 _{(one layer, 70µm thick) copper area for Vbb}
connection. PCB is vertical without blown air. See page 13
7) _{not subject to production test, specified by design}
8) _{See timing diagram on page 11.}
Infineon Technologies AG
4
2006-Mar-27