BGF200 Datasheet, PDF (4/6 Pages) Infineon Technologies AG – Microphone Filter and ESD Protection

BGF200
Microphone Filter and ESD Protection
Feature
• Microphone filter
• Integrated ESD protection up to 15 kV
• Low input impedance
• More than 30 dB stopband attenuation
• Ideal for GSM/UMTS
• Wafer Level Package with SnAgCu-Bumps
Microphone Filter and ESD Protection
WLP-8-1,- 2, -4
A3
B1
C3
C1
B2 B3 C2
Figure 1 Blockdiagram
A2
B GF2 0 0 _ B lo ckd ia g r a m .vsd
Description
The BGF200 is a microphone filter with low pass characteristic offering a very high stop band attenuation up to 6
GHz. All pins are protected against ESD. The wafer level package is a green package with a size of only 1.6 mm
x 1.6 mm and a total height of 0.65 mm.
Type
BGF200
Package
WLP-8-4
Marking
GF200
Chip
N0703
Table 1 Maximum Ratings
Parameter
Symbol
Voltage at pin A2 to GND
V_A2
Voltage at all other pins to GND
V_P
Operating temperature range
T_OP
Storage temperature range
T_STG
Summed up input power for all pins
P_IN
Electrostatic Discharge According to IEC61000-4-2¹⁾
Between pins C3 and B3
V_E
Between all other pins
V_I
1) Contact discharge
Min.
0
-14
-40
-65
-15
-2
Values
Unit
Typ. Max.
4.0 V
14 V
+85 °C
+150 °C
25 mW
15 kV
2
kV
Note /
Test Condition
T_A < 70 °C
Data Sheet
4
V2.1, 2006-10-17