C161S Datasheet, PDF (37/75 Pages) Infineon Technologies AG – 16-Bit Single-Chip Microcontroller

C161S
4
Electrical Parameters
Electrical Parameters
4.1
Absolute Maximum Ratings
Table 7
Absolute Maximum Rating Parameters
Parameter
Symbol Limit Values Unit Notes
Min.
Max.
Storage temperature
T_ST
-65
Junction temperature
T_J
-40
Voltage on V_DD pins with V_DD
-0.5
respect to ground (V_SS)
Voltage on any pin with V_IN
-0.5
respect to ground (V_SS)
Input current on any pin I_OV
-10
during overload condition
150
°C –
150
°C under bias
6.5
V–
V_DD + 0.5 V –
10
mA –
Absolute sum of all input Σ|I_OV| –
currents during overload
condition
100
mA –
Power dissipation
P_DISS
–
1.5
W–
Note: Stresses above those listed under “Absolute Maximum Ratings” may cause
permanent damage to the device. This is a stress rating only and functional
operation of the device at these or any other conditions above those indicated in
the operational sections of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
During absolute maximum rating overload conditions (V_IN > V_DD or V_IN < V_SS) the
voltage on V_DD pins with respect to ground (V_SS) must not exceed the values
defined by the absolute maximum ratings.
Data Sheet
33
V1.0, 2003-11