|
TLE7236SE Datasheet, PDF (32/37 Pages) Infineon Technologies AG – SPI Driver for Enhanced Relay Control | |||
|
◁ |
SPI Driver for Enhanced Relay Control
TLE7236SE
Serial Peripheral Interface (SPI)
9.6
Electrical Characteristics
Unless otherwise specified: VDD = 3.0 V to 5.5V, VBAT = 9.0 V to 16V, Tj = -40 °C to +150 °C
typical values: VDD = 5.0 V, VBAT = 13.5 V, Tj = 25 °C
Pos. Parameter
Symbol
Limit Values
Unit Test Conditions
min. typ. max.
Input Characteristics (CS, SCLK, SI)
9.6.1 L level of pin
CS
SCLK
SI
9.6.2 H level of pin
CS
SCLK
SI
9.6.3 L-input pull-up current through CS
VCS(L)
VSCLK(L)
VSI(L)
VCS(H)
VSCLK(H)
VSI(H)
ICS(L)
9.6.4 H-input pull-up current through CS ICS(H)
9.6.5 L-input pull-down current through pin ISCLK(L)
SCLK
ISI(L)
SI
9.6.6 H-input pull-down current through pin ISCLK(H)
SCLK
ISI(H)
SI
Output Characteristics (SO)
0
â
0.5*VDD â
5
40
2.5
â
1.5
â
10
40
0.2*VDD V â
VDD
Vâ
90
µA VCS = 0 V
VDD = 5 V
â
µA 1)
VDD = 5 V
VCS = 0.5*VDD
â
µA 1)
VDD = 5 V
VSCLK = VSI = 0.2*VDD
µA 1)
80
VDD= 5 V
VSCLK = VSI = VDD
9.6.7 L level output voltage
9.6.8 H level output voltage
VSO(L)
0
â 0.4
V ISO = +2 mA
VSO(H)
VDD - â
VDD
0.4 V
ISO = -1.5 mA
9.6.9 Output tristate leakage current
Timings
ISO(OFF)
-10
â 10
µA VCS = VDD
9.6.10 Serial clock frequency
fSCLK
0
â5
9.6.11 Serial clock period
tSCLK(P)
200
â
â
9.6.12 Serial clock high time
tSCLK(H)
50
ââ
9.6.13 Serial clock low time
tSCLK(L)
50
ââ
9.6.14 Enable lead time (falling CS to rising tCS(lead) 250
â
â
SCLK)
9.6.15 Enable lag time (falling SCLK to rising tCS(lag)
250
â
â
CS )
MHz â
ns â
ns 1)
ns 1)
ns 1)
ns 1)
9.6.16 Transfer delay time (rising CS to
falling CS )
9.6.17 Data setup time (required time SI to
falling SCLK)
9.6.18 Data hold time (falling SCLK to SI)
tCS(td)
tSI(su)
tSI(h)
250 â â
20
ââ
20
ââ
ns 1)
ns 1)
ns 1)
Data Sheet
32
Rev. 1.0, 2010-02-18
|
▷ |