TLE6254-3G_07 Datasheet, PDF (3/26 Pages) Infineon Technologies AG – Fault Tolerant Low Speed CAN-Transceiver

Fault Tolerant Low Speed CAN-Transceiver
TLE6254-3G
Features
• Data transmission rate up to 125 kBaud
• Low current consumption in stand-by and sleep
operation mode, including BUS wake-up
• Implemented receive-only mode
• Optimized EMC behavior
• Wake-up input pin, dual edge sensitive
• Battery fail flag
• Extended bus failure management to guarantee safe
operation during all bus line failure events
• Support of failure conditions
• Fully wake-up capability during all bus line failures conditions
• Supports one-wire transmission mode with ground offset voltages up to 1.5 V
• Prevention from bus occupation in case of CAN controller failure
• Thermal protection
• Bus line error protection against transients in automotive environment
• Green Product (RoHS compliant)
• AEC Qualified
Description
The CAN-Transceiver TLE6254-3G works as the interface between the CAN protocol
controller and the physical CAN bus-lines.
It is optimized for low-speed data transmission (up to 125 kBaud) in automotive and
industrial applications.
While no data is transferred, the power consumption can be minimized by multiple low
power modes.
In normal operation mode a differential signal is transmitted/received. When bus wiring
failures are detected the device automatically switches in a dedicated single-wire mode
to maintain communication.
Type
TLE6254-3G
Data Sheet
Package
PG-DSO-14
3
Rev. 2.1, 2007-08-09