TLE6251DS Datasheet, PDF (3/22 Pages) Infineon Technologies AG – High Speed CAN-Transceiver with Bus wake-up

High Speed CAN-Transceiver with Bus wake-up
TLE6251DS
Features
• CAN data transmission rate up to 1 Mbaud
• Compatible to ISO/DIS 11898
• Supports 12 V and 24 V automotive applications
• Low power mode with remote wake-up via CAN bus
• Wake signaling by RxD change
• No BUS load in stand-by mode
• Wide common mode range for electromagnetic immunity
(EMI)
• Digital inputs compatible to 3.3 and 5 V logic devices
• CAN short circuit proof to ground, battery and V_CC
• Split termination to stabilize the recessive level
• TxD time-out function
• Overtemperature protection
• Protected against automotive transients
• Green Product (RoHS compliant)
• AEC Qualified
Description
The CAN-transceiver TLE6251DS is a monolithic integrated circuit in a PG-DSO-8 package for
high speed differential mode data transmission (up to 1 Mbaud) and reception in automotive and
industrial applications. It works as an interface between the CAN protocol controller and the
physical bus lines compatible to ISO/DIS 11898.
As a successor to the first generation of HS CAN (TLE6250), the TLE6251DS is designed to
provide an excellent passive behavior when the transceiver is switched off (mixed networks,
terminal 15/30 applications) and a remote wake-up capability via CAN bus in low power mode.
This supports networks with partially un-powered nodes.
The TLE6251DS has two operation modes, the normal and the stand-by mode. These modes can
be chosen by the STB pin. If the TLE6251DS is in stand-by mode and a message on the bus is
Type
TLE6251DS
Data Sheet
Package
PG-DSO-8
3
Rev. 3.1, 2007-08-20