TLE4252 Datasheet, PDF (3/11 Pages) Infineon Technologies AG – Tracking Regulator

TLE 4252
(P-TO252-5-1 D-Pak)
GND
TLE 4252
12345
AEP03534.VSD
Figure 2 Pin Configuration (Draft, subject to alternation!)
Table 1
Pin No.
1
2
3
4
5
Pin Definitions and Functions (draft, subject to alternation)
Symbol
Function
I
Supply voltage input; Input for battery or a pre-regulated
voltage of a e.g. DC to DC converter.
EN
Enable input for tracker; An active high signal turns on the
device, with active low the tracker is turned off.
GND
Ground; Connected to the heatsink of the package.
ADJ
Adjust input for tracker; Input for the reference voltage
which can be connected directly or by voltage divider to the
reference (see Application Information).
Q
Output voltage of tracker; For a stable operation to avoid
ringing at the output connect a capacitor of C_Q ≥ 10 µF and
0 ≤ ESR ≤ 5 Ω to GND.
Data Sheet
3
Rev. 1.2, 2004-08-11