TLE4208G_16 Datasheet, PDF (3/16 Pages) Infineon Technologies AG – Quad Half-Bridge Driver IC

1-A Quad Half-Bridge Driver IC
TLE4208G
1
Overview
Features
• Driver for up to 3 motors
• Delivers up to 0.8 A continuous
• Optimized for DC motor management applications
• Very low current consumption in stand-by (Inhibit) mode
• Low saturation voltage; typ.1.2 V total @ 25 °C; 0.4 A
• Output protected against short circuit
• Error flag diagnosis
• Overvoltage lockout and diagnosis
• Undervoltage lockout
• CMOS/TTL compatible inputs with hysteresis
• No crossover current
• Internal clamp diodes
• Overtemperature protection with hysteresis and diagnosis
• Enhanced power DSO-Package
• Green Product (RoHS compliant)
• AEC Qualified
PG-DSO-28
Description
The TLE4208G is a protected Quad-Half-Bridge-Driver designed specially for automotive and industrial motion
control applications. The part is built using Infineons bipolar high voltage power technology DOPL.
In a cascade configuration up to three actuators (DC motors) can be connected between the four half-bridges.
These four half-bridges are configured as 2 dual-half-bridges, which are supplied and controlled separately.
Operation modes forward (cw), reverse (ccw), brake and high impedance are invoked from a standard interface.
The standard enhanced power PG-DSO-28 package meets the application requirements and saves PCB-board
space and costs. Moreover the package is RoHS compliant.
Furthermore the built-in features like diagnosis, over- and undervoltage-lockout, short-circuit protection, over-
temperature protection and the very low quiescent current in stand-by mode will open a wide range of automotive
and industrial applications.
Type
TLE4208G
Data Sheet
Package
PG-DSO-28
3
Marking
TLE4208G
Rev. 1.4, 2016-02-02