SLE66CL80P Datasheet, PDF (3/10 Pages) Infineon Technologies AG – Secure Mobile Solutions - Security

µµ
SLE 66CL80P
16-Bit High Security Dual Interface Controller
ISO/IEC 7816 and 14443 Type A &B Compliant Interfaces
For Contact and Contactless Operation with MMU in 0.22 µm CMOS Technology
72-Kbyte ROM, 2304-byte RAM, 8-Kbyte EEPROM
112-Bit / 192-Bit DDES-EC2 Accelerator
supporting DES, 3DES and Elliptic Curve GF(2n)
Features
• Enhanced low power 8051 CPU with
extended addressing modes for contact
and contactless smart card applications
• Instruction set opcode compatible with
standard 8051 processor with additional
powerful instructions optimized for smart
card application
• Dedicated, non-standard architecture with
execution time 6 times faster (18 times
using PLLmax) than standard 8051
processor at same external clock
• 70 Kbytes User ROM for operating system
and application (programs & data)
• 2 Kbytes reserved ROM for Resource
Management System (RMS_E) with
Contactless Optimized EEPROM
write/erase routines
• 8 Kbytes Secure EEPROM in SuperSlim
technology for application program and
data
• 2048 bytes XRAM and 256 bytes internal
RAM for fast data processing
• Memory Management Unit
• Certified True Random Number
Generator
• Dual Key Triple DES (DDES) &
GF (2ⁿ) Elliptic Curve (EC2) Accelerator
• CRC Module according to ISO/IEC 3309
supporting CCIT v.41 & HDLC X25
• 8 Interrupt Vectors Module with 3 priority
levels to ensure real time operation
• PLL: to speed up the internal CPU clock
frequency up to 15MHz (optional use)
• Two 16-bit Timer with interrupt capability
for protocols, security checks & watch dog
implementations
• Power saving sleep and clock stop modes
• Temperature range:
contact-based: -25°C to +85°C
contact-less: -25°C to +70°C
Full operation either via Contact-based
and/or Contactless interfaces
controlled by Operating System
enhances Security Level
Contact-based Interface
• Contact configuration and serial
interface according to ISO/IEC 7816
• UART handling serial interface compliant
with ISO/IEC 7816 supporting
transmission protocols T=0 and T=1
• Supply voltage range:
5V ± 10% (Class A)
3V ± 10% (Class B)
• Current consumption < 10 mA @ 5.5 V
• External CPU clock frequency:
1 to 7.5 MHz
• Internal CPU clock frequency:
up to 15 MHz
• ESD protection larger than 6 kV
Contactless Interface
• Interface compliant to ISO/IEC 14443 for
both Type A and Type B
• Carrier frequency 13.56 MHz
• Data rate
106 Kbit/s in type A operation
up to 848 Kbit/s in type B operation
• Anticollision & Transmission Protocol
supported by open source application
notes for both Type A & B
• Flexible Internal CPU clock frequency:
from 1.7MHz up to 15 MHz
• 256 bytes buffer for contactless data
exchange (FiFo circular architecture)
• Parallel operation of CPU, Peripherals
like DES, CRC and Contactless Interface
possible
Short Product Information
3 / 10
2004-04-01