ITS4141D Datasheet, PDF (3/19 Pages) Infineon Technologies AG – Smart High-Side Power Switch for Industrial Applications 1 Channel: 1 x 200mΩ

ITS 4141D
Maximum Ratings
Parameter
Symbol
at T_j = 25°C, unless otherwise specified
Supply voltage
Continuous input voltage²⁾
Load current (Short - circuit current, see page 5)
Current through input pin (DC)
Reverse current through GND-pin³⁾
Junction temperature
Operating temperature
V_bb
V_IN
I_L
I_IN
-I_GND
T_j
T_a
Storage temperature
T_stg
Power dissipation ⁴⁾
P_tot
Inductive load switch-off energy dissipation⁴⁾⁵⁾ E_AS
single pulse
T_j = 125 °C, I_L = 0.5 A
Load dump protection⁵⁾ V_LoadDump6)= V_A + V_S
R_I=2Ω, t_d=400ms, V_IN= low or high, V_A=13,5V
R_L = 47 Ω
V_Loaddump
Electrostatic discharge voltage (Human Body Model) V_ESD
according to ANSI EOS/ESD - S5.1 - 1993
ESD STM5.1 - 1998
Input pin
All other pins
Value
Unit
-0,3¹⁾...48
V
-10...V_bb
self limited
A
±5
mA
-0.5
A
internal limited °C
-30...+85
°C
-40 ... +105
°C
1.4
W
12
J
V
83
kV
±1
±5
1defined _{by Ptot}
2At _{VIN > Vbb, the input current is not allowed to exceed ±5 mA.}
3defined _{by Ptot}
4Device _{on 50mm*50mm*1.5mm epoxy PCB FR4 with 6 cm2 (one layer, 70µm thick) copper area for Vbb}
connection. PCB is vertical without blown air.
5not _{subject to production test, specified by design}
6_{VLoaddump is setup without the DUT connected to the generator per ISO 7637-1 and DIN 40839 .}
Supply voltages higher than V_bb(AZ) require an external current limit for the GND pin, e.g. with a
150Ω resistor in GND connection. A resistor for the protection of the input is integrated.
Page 3
2006-03-22