ISP762T Datasheet, PDF (3/16 Pages) Infineon Technologies AG – Smart Power High-Side-Switch for Industrial Applications

ISP 762 T
Maximum Ratings at T_j = 25 °C, unless otherwise specified
Parameter
Symbol
Supply voltage
Supply voltage for full short circuit protection
T_j = -40...+150°C
Continuous input voltage
Load current (Short - circuit current, see page 5)
Current through input pin (DC)
Junction temperature
Operating temperature
Storage temperature
Power dissipation ¹⁾
Inductive load switch-off energy dissipation¹⁾²⁾
single pulse, (see page 8)
V_bb
V_bb(SC)
V_IN
I_L
I_IN
T_j
T_a
T_stg
P_tot
E_AS
Tj =150 °C, V_bb = 13.5 V, I_L = 1 A
Load dump protection²⁾ V_LoadDump3)= V_A + V_S
R_I=2Ω, t_d=400ms, V_IN= low or high, V_A=13,5V
R_L = 13.5 Ω
V_Loaddump
Electrostatic discharge voltage (Human Body Model) V_ESD
according to ANSI EOS/ESD - S5.1 - 1993
ESD STM5.1 - 1998
Input pin
all other pins
Thermal Characteristics
Thermal resistance @ min. footprint
Thermal resistance @ 6 cm² cooling area ¹⁾
R_th(JA)
R_th(JA)
Value
Unit
40
V
V_bb
-10 ... +16
self limited
A
±5
mA
150
°C
-30...+85
-40 ... +105
1.5
W
870
mJ
V
60
kV
±1
±5
-
95
- K/W
-
70 83
1Device _{on 50mm*50mm*1.5mm epoxy PCB FR4 with 6 cm2 (one layer, 70µm thick) copper area for drain}
connection. PCB is vertical without blown air. (see page 16)
2not _{subject to production test, specified by design}
3_{VLoaddump is setup without the DUT connected to the generator per ISO 7637-1 and DIN 40839 .}
Supply voltages higher than Vbb(AZ) require an external current limit for the GND pin, e.g. with a
150Ω resistor in GND connection. A resistor for the protection of the input is integrated.
Page 3
2006-03-09