|
ICE3A0365 Datasheet, PDF (3/30 Pages) Infineon Technologies AG – Off-Line SMPS Current Mode Controller with integrated 650V Startup Cell/CoolMOS | |||
|
◁ |
CoolSETâ¢-F3
Off-Line SMPS Current Mode Controller
with integrated 650V Startup Cell/
CoolMOSâ¢
Product Highlights
PG-DIP-7-1
P-DIP-7-1
⢠Best in class in DIP7, DIP8, TO220, I2Pak packages
⢠Leadfree for DIP7 and DIP8 packages
⢠Active Burst Mode to reach the lowest Standby Power
Requirements < 100mW
⢠Protection features (Auto Restart Mode) to increase
robustness and safety of the system
⢠Adjustable Blanking Window for high load jumps to
increase system reliability
⢠Isolated drain package for TO220/I2PAK
⢠Increased creepage distance for TO220/I2PAK
⢠Wide power class of products for various applications
PG-DIP-8-6
P-DIP-8-4, -6
PP-T-OT2O202-6-2460-6-46
PP--TTOO2202-62-407 -6-47
Features
Description
⢠650V avalanche rugged CoolMOS⢠with built in The new generation CoolSETâ¢-F3 provides Active Burst
switchable Startup Cell
Mode to reach the lowest Standby Power Requirements
⢠Active Burst Mode for lowest Standby Power
<100mW at no load. As the controller is always active
@ light load controlled by Feedback signal
during Active Burst Mode, there is an immediate response
⢠Fast load jump response in Active Burst Mode on load jumps without any black out in the SMPS. In Active
⢠67/100 kHz fixed switching frequency
Burst Mode the ripple of the output voltage can be reduced
⢠Auto Restart Mode for Overtemperature Detection <1%. Furthermore, to increase the robustness and safety
⢠Auto Restart Mode for Overvoltage Detection
of the system, the device enters into Auto Restart Mode in
⢠Auto Restart Mode for Overload and Open Loop the cases of Overtemperature, VCC Overvoltage, Output
⢠Auto Restart Mode for VCC Undervoltage
Open Loop or Overload and VCC Undervoltage. By means
⢠Blanking Window for short duration high current of the internal precise peak current limitation, the
⢠User defined Soft Start
dimension of the transformer and the secondary diode can
⢠Minimum of external components required
be lowered which leads to more cost efficiency. An
⢠Max Duty Cycle 72%
adjustable blanking window prevents the IC from entering
⢠Overall tolerance of Current Limiting < ±5%
Auto Restart or Active Burst Mode unintentionally during
⢠Internal PWM Leading Edge Blanking
high load jumps. The CoolSETâ¢-F3 family consists a wide
⢠Soft switching for low EMI
power class range of products for various applications.
85 ... 270 VAC
Typical Application
CBulk
VCC
Snubber
CVCC
Drain
+
Converter
DC Output
-
Power Management
Startup Cell
GND
PWM Controller
Current Mode
Precise Low Tolerance Peak
Current Limitation
Control
Unit
Active Burst Mode
Auto Restart Mode
Depl-CoolMOSâ¢
CS
RSense
FB
SoftS
CoolSETâ¢-F3
CSoftS
Version 1.3
3
15 Sep 2004
|
▷ |