English
Language : 

TLD1314EL_15 Datasheet, PDF (24/29 Pages) Marl International Limited – Basic LED Driver
TLD1314EL
Power Stage
Note: Due to the reverse battery protection a reverse protection diode for the light module may be obsolete. In case
of high ISO-pulse requirements and only minor protecting components like capacitors a reverse protection
diode may be reasonable. The external protection circuit needs to be verified in the application.
9.2
Electrical Characteristics Power Stage
Electrical Characteristics Power Stage
Unless otherwise specified: VS = 5.5 V to 18 V, Tj = -40 °C to +150 °C, VOUTx = 3.6 V, all voltages with respect to
ground, positive current flowing into pin for input pins (I), positive currents flowing out of the I/O and output pins
(O) (unless otherwise specified)
Pos. Parameter
Symbol
Limit Values
Unit Conditions
Min. Typ. Max.
9.2.1 Output leakage current
IOUTx(leak)
µA
IIN_SET = 0 µA
VOUTx = 2.5 V
Tj = 150 °C
–
–
7
1) Tj = 85 °C
–
–
3
9.2.2 Output leakage current in -
–
–
50
µA
I 1)
IN_SET
= 0 µA
boost over battery setup
IOUTx(leak,B2B)
VOUTx = VS = 40 V
9.2.3 Reverse output current
-IOUTx(rev)
–
–
1
µA
1) VS = -16 V
Output load: LED with
break down voltage
< - 0.6 V
9.2.4 Output current accuracy kLT
limited temperature range
9.2.5 Output current accuracy kALL
over temperature
697 750 803
645 750 855
9.2.6
Voltage drop over power VPS(CC)
stage during current control
VPS(CC) = VS - VOUTx
697 750 803
645 750 855
0.75 –
–
V
9.2.7 Required output voltage for VOUTx(CC) 2.3
–
–
V
current control
1)Tj = 25...115 °C
VS = 8...18 V
VPS = 2 V
RSET = 6...12 kΩ
RSET = 30 kΩ
1)Tj = -40...115 °C
VS = 8...18 V
VPS = 2 V
RSET = 6...12 kΩ
RSET = 30 kΩ
1) VS = 13.5 V
RSET = 12 kΩ
IOUTx ≥ 90% of
(kLT(typ)/RSET)
1) VS = 13.5 V
RSET = 12 kΩ
IOUTx ≥ 90% of
(kLT(typ)/RSET)
9.2.8 Maximum output current IOUT(max)
120 –
–
mA RSET = 4.7 kΩ
The maximum output
current is limited by the
thermal conditions.
Please refer to
Pos. 4.3.1 - Pos. 4.3.3
Data Sheet
24
Rev. 1.1, 2015-03-24