TLI4970-D050T5_16 Datasheet, PDF (21/31 Pages) Infineon Technologies AG – Miniature coreless magnetic current sensor for AC and DC measurements

TLI4970-D050T5
Specification
3.6
CSA Component Acceptance
The following section describes the test condition for the CSA component acceptance.
Table 3-8 Absolute maximum ratings according to CSA component acceptance
Description
Symbol Characteristic
Absolute maximum ambient temperature
T_{A_CA}
Absolute maximum Isolation voltage¹⁾
U_{ISO_CA}
Absolute maximum current²⁾
I_{PFSR_CA}
1) Test conditions: 60 Hz for 60 s
2) Test condition: 4h, the device was mounted on the PCB described below
3) rms or DC
85
2546
50
Unit
°C
V_RMS
A³⁾
3.6.1 Board Description for CSA Component Acceptance Test Conditions
The device was soldered on a test board described in Figure 3-4 and Table 3-9. Besides, a heat sink was
mounted (Figure 3-3).
Device
PCB
Heat sink
Figure 3-3 Test board setting
Table 3-9 Test board parameters
Description
Dimension
PCB material
PCB thickness
No. of copper layers
Thickness of each copper layer
Value
85 mm x 36 mm
FR4
1.55 µm
4
105 µm
Data Sheet
21
Rev. 1.1, 2016-06-17