TLD1310EL_15 Datasheet, PDF (21/24 Pages) Infineon Technologies AG – 3 Channel High Side Current Source

TLD1310EL
Application Information
8
Application Information
Note: The following information is given as a hint for the implementation of the device only and shall not be
regarded as a description or warranty of a certain functionality, condition or quality of the device.
V_BATT
C _{mo d}=2 .2µF
IS O- P u lse
protection circuit
depending on
requirements
10kΩ
CVS =4 .7nF
VS
Internal
supply
EN
Thermal
protection
Output
control
OUT3
OUT2
OUT1
4.7nF** 4.7nF** 4.7nF**
R_SET
IN_SET Current
adjust
BasLicITILXE^TMDBaDsirciver
GNDS GND
GND
Figure 12 Application Diagram
** For EMI improvement, if required.
Note: This is a very simplified example of an application circuit. In case of high ISO-pulse requirements a reverse
protection diode may be used for LED protection. The function must be verified in the real application.
8.1
Further Application Information
• For further information you may contact http://www.infineon.com/
Data Sheet
21
Rev. 1.1, 2015-03-19