XC164CM Datasheet, PDF (2/2 Pages) Infineon Technologies AG – 16-bit Microcontroller

XC164CM Block Diagram
Product Brief
PSRAM
2 Kbytes
DPRAM
2 Kbytes
DSRAM
2 Kbytes
ProgMem
Flash
64 Kbytes
OCDS
Debugs Support
XTAL
Osc / PLL
Clock Generator
RTC
PMU
WDT
CPU
DMU
C166SV2-Core
Interrupt & PEC
ADC
GPT
8/10-bit _T2
14 Channels _T3
T4
T5
T6
ASC0 ASC1 SSC0
(USART) (USART) (SPI)
BRGen BRGen BRGen
SSC1
(SPI)
BRGen
Peripheral
CC2 ^{Data Bus}
T7
T8
Red. EBC
XBUS Control
Interrupt Bus
CC6
Twin
T12
CAN
T13
AB
Port 9
6
Port 5
14
Port 3
13
Port 1
14
Derivatives
Type
SAF-XC164CM-8F20F
SAK-XC164CM-8F20F
SAF-XC164CM-8F40F
SAK-XC164CM-8F40F
Sales Code
Q67127-*
Q67127-*
Q67127-*
Q67127-*
Package
PG-TQFP-64
PG-TQFP-64
PG-TQFP-64
PG-TQFP-64
12 V
Temperature
Voltage
Current
Torsion
Distance
Pressure
Humidity
Light
G-force
...
Power Supply
Power Control
Power Save Control
Programming,
Test, Debug,
Diagnosis, Interface
Sensors
Microcontroller
XC164CM
Control
Outputs
Drivers
Communication
Interface Drivers
CAN
LIN
...
Generic Application
How to reach us:
http://www.infineon.com
Published by
Infineon Technologies AG,
St.-Martin-Strasse 53,
D-81669 München
© Infineon Technologies AG 2004.
All Rights Reserved.
Template: pb_tmplt.fm/4/2004-01-01
Attention please!
The information herein is given to describe certain components
and shall not be considered as a guarantee of characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not
limited to warranties of non-infringement, regarding circuits,
descriptions and charts stated herein.
Information
For further information on technology, delivery terms
and conditions and prices please contact your nearest
Infineon Technologies Office.
Warnings
Due to technical requirements components may contain dangerous
substances. For information on the types in question please contact
your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-
support devices or systems with the express written approval of
Infineon Technologies, if a failure of such components can reason-
ably be expected to cause the failure of that life-support device or
system, or to affect the safety or effectiveness of that device or sys-
tem. Life support devices or systems are intended to be implanted
in the human body, or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume
that the health of the user or other persons may be endangered.
Published by Infineon Technologies AG
Ordering No. B158-H8386-X-X-7600
Printed in Germany
PS 02042. NB