V23834-L6-E5 Datasheet, PDF (2/8 Pages) Infineon Technologies AG – SMCTM S, M, L, XL Connector

V23834-L6-Ex
Description
Description
Ordering Information
Part Number
Connector Kit (without ferrule)
V23834-L6-E5/E6
V23834-L6-E3/E4
V23834-L6-E1/E2
SMC S (f)/(m)¹⁾
SMC M (f)/(m)¹⁾
SMC XL (f)/(m)¹⁾
Jumper Type
V23867-C6073-+yyy¹⁾
V23867-C6074-+yyy¹⁾
V23867-Cxx34-+yyy¹⁾
SMC S (f) - SMC S (f) (with blank ribbon)¹⁾
SMC M (f) - SMC M (f) (with blank ribbon)¹⁾
SMC XL (f) - SMC XL (f) (with cable)¹⁾
Adapter Type
V23867-Z9999-W900
Simplex, black, 1 to 1, with plate
V23867-Z9999-W904
Simplex, black, 1 to 1, without plate
Other configurations on request
1) _{(f): female; (m): male; xx: cable code; +yyy: length code.}
Connectors
The connector type SMC is an optical multifiber connector which is characterized by a
standardized MT ferrule interface (fiber pitch is 250 µm) for up to 12 fibers. It was
developed by Siemens/Infineon and specially designed for the PAROLI^® module port.
The connector is now part of a whole SMC product family to be applied for a variety of
state-of-the-art and future optical network technologies.
The MT ferrule characteristics meet the requirements of the standards IEC 60874-16
and IEC 61754-5. Work is in progress to define a fiber optical connector intermateability
standard for the SMC (FOCIS-14, Ref. no. SP-4834, to be TIA/EIA-604-14).
Adapter
The SMC adapter is part of the SMC optical connector family. It serves to connect
mechanically two SMC connector plugs with up to 12 fibers applied for a variety of state-
of-the-art and future optical network technologies.
Data Sheet
2
2001-10-01