TLE42694_10 Datasheet, PDF (2/29 Pages) Infineon Technologies AG – Low Dropout Fixed Voltage Regulator

Low Dropout Fixed Voltage Regulator
TLE42694
1
Overview
Features
• Output Voltage 5 V ± 2%
• Ouput Current up to 150 mA
• Very Low Current Consumption
• Early Warning
• Power-on and Undervoltage Reset with Programmable Delay Time
• Reset Low Down to V_Q = 1 V
• Adjustable Reset Threshold
• Very Low Dropout Voltage
• Output Current Limitation
• Reverse Polarity Protection
• Overtemperature Protection
• Suitable for Use in Automotive Electronics
• Wide Temperature Range from -40 °C up to 150 °C
• Input Voltage Range from -42 V to 45 V
• Integrated Pull-Up Resistors at Logic Outputs
• Green Product (RoHS compliant)
• AEC Qualified
PG-DSO-8
Description
The TLE 42694 is a monolithic integrated low dropout voltage
regulator, especially designed for automotive applications. An input
PG-DSO-14
voltage up to 45 V is regulated to an output voltage of 5.0 V. The
component is able to drive loads up to 150 mA. It is short-circuit proof
by the implemented output current limitation and has an integrated
overtemperature shutdown. A reset signal is generated for an output
voltage V_Q,rt of typically 4.65 V. This threshold can be decreased by
an external resistor divider. The power-on reset delay time can be
programmed by the external delay capacitor. The additional sense
comparator provides an early warning function: Any voltage (e.g. the
input voltage) can be monitored, an under-voltage condition is indicated
by setting the comparator’s output to low. The reset and sense output
are internally connected to the output Q via a pull-up resistor. If these
PG-SSOP-14 exposed pad
integrated resistors are not desired, the TLE42794 can be used instead of the TLE42694.
Type
TLE42694G
TLE42694GM
TLE42694E
Data Sheet
Package
PG-DSO-8
PG-DSO-14
PG-SSOP-14 exposed pad
2
Marking
42694G
42694GM
42694E
Rev. 1.2, 2010-11-26