|
TLE42694-2 Datasheet, PDF (2/20 Pages) Infineon Technologies AG – Low Dropout Fixed Voltage Regulator | |||
|
◁ |
Low Dropout Fixed Voltage Regulator
TLE42694-2
1
Overview
Features
⢠Output Voltage 5 V ± 2%
⢠Ouput Current up to 150 mA
⢠Very Low Current Consumption
⢠Power-on and Undervoltage Reset with Programmable Delay Time
⢠Reset Low Down to VQ = 1 V
⢠Adjustable Reset Threshold
⢠Very Low Dropout Voltage
⢠Output Current Limitation
⢠Reverse Polarity Protection
⢠Overtemperature Protection
⢠Suitable for Use in Automotive Electronics
⢠Wide Temperature Range -40 °C ⤠Tj ⤠150 °C
⢠Input Voltage Range from -42 V to 45 V
⢠Integrated Pull-Up Resistors at Logic Outputs
⢠Green Product (RoHS compliant)
⢠AEC Qualified
PG-SSOP-14 exposed pad
Description
The TLE42694-2 is a monolithic integrated low dropout voltage regulator,
especially designed for automotive applications. An input voltage up to 45 V (with reverse polarity protection) is
regulated to an output voltage of 5.0 V. The component is able to drive loads up to 150 mA. Internal over-current
and over-temperatuer features prevent damage of the part in over-load conditions. A reset signal is generated for
an output voltage VQ,rt of typically 4.65 V. This threshold can be decreased by an external resistor divider. The
power-on reset delay time can be programmed by the external delay capacitor. The reset output is internally
connected to the output Q via a pull-up resistor.
Type
TLE42694-2EL
Data Sheet
Package
PG-SSOP-14 exposed pad
2
Marking
426942E
Rev. 1.0, 2012-07-03
|
▷ |