SABC517ALN Datasheet, PDF (2/72 Pages) Infineon Technologies AG – 8-Bit CMOS Microcontroller

C517A Data Sheet
Revision History :
01.99
Previous Releases :
08.97 (Original Version)
Page
(previous
version)
Page
(new
version)
Subjects (changes since last revision)
All sections
2
2
2 to 3
5
5
47
48
49
49
49
50
51
53
55
62
-
All sections
2
2
2
5
6
50
50
52
52
52
53
54
56
58
65
69
V_CC is changed to V_DD and I_CC is changed to I_DD.
"with wake-up capability through INT0 pin" is removed.
P-LCC-84 package is added under the feature list.
Table 1; deleted and replaced by “Ordering Information” paragraph
“Additional Literature”;deleted.
Figure 4; added.
Table 1; modified, column “P-LCC-84” is added.
"or by a short low pulse at pin P3.2/INT0" is removed.
"Short low pulse at pin P3.2/INT0" is removed.
“Absolute Maximum Ratings” is changed to tabular form.
Fifth line; “During overload conditions ...” changed to “During absolute
maximum rating conditons ...”.
“Operating Conditions” is added.
“V_CC = 5 V + 10% ... “ is replaced by “(Operating Conditions apply)”.
Notes (7); modified.
“V_CC = 5 V + 10% ... “ is replaced by “(Operating Conditions apply)”.
“V_CC = 5 V + 10% ... “ is replaced by “(Operating Conditions apply)”.
First line; “C517A-1RM” is replaced by “C517A-4RM/4RN”
Figure 38; added.
Edition 01.99
This edition was realized using the software system FrameMaker^®.
Published by : Siemens AG, Semiconductor Group, Product Definition 8-Bit Microcontroller Components,
Balanstraße 73, D-81541 München .
© Siemens AG 01.99,. All Rights Reserved.
“Enhanced Hooks Technology“ is a trademark and patent of Metalink Corporation, licensed to Siemens.
As far as patents or other rights of third parties are concerned, liability is only assumed for components, not for
applications, processes and circuits implemented within components or assemblies.
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved.
For questions on technology, delivery and prices please contact the Semiconductor Group Offices in Germany or
the Siemens Companies and Representatives worldwide.
Due to technical requirements components may contain dangerous substances. For information on the type in
question please contact your nearest Siemens Office, Components Group.
Siemens AG is an approved CECC manufacturer.
Packing
Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales
office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport.
For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have ti invoice
you for any costs incurred.