PEB1755E Datasheet, PDF (2/2 Pages) Infineon Technologies AG – Semiconductor Solutions for High Speed Communication and Fiber Optic Applications

PRODUCT BRIEF
16@800M
RPR/
SRP
L2 Mac
XAUI IF
PoS
Mapping
10GbE
RS
4@3.125G
POH
TOH
Framer/
deFramer
SONET/SDH
mP IF
Frea 10G Block Diagram
Interfaces
■ 622.08 MHz 16-bit line interface
(SFI-4.1)
■ 2.5 GHz 4-bit line interface (SFI-4.2)
■ 644 MHz 16-bit line interface (XSBI)
■ 3.125 GHz 4-bit line interface (XAUI)
■ 800 MHz 16-bit system interface
(SPI-4.2)
■ 3.125 GHz 4-bit mate interface (XAUI)
■ 155 MHz 16-bit line interface for OC48
■ TOH add/drop interface
■ JTAG interface
■ 16-bit processor interface for configu-
ration, management, and statistics
gathering
General Specifications
■ 0.13 µm process
■ Power: ~8 W
■ Core Voltage: 1.3 V
■ I/O Buffer Voltage: 3.3 V
■ Operating temp. 0 °C to 70 °C
■ Full Scan, JTAG, MemBIST
■ Flipchip P-FCHBGA-979
Type
OC192/OC48 PoS
Framer and RPR Mac
Sales Code
PEB1755E
Package
P-FCHBGA 979
Network Side
F^OOr^rrce^chha^iidd
West
Outer RX
Framer RPR
L3
RPR
Inner TX
Ring
Inner RX
Framer RPR
L3
Outer TX
East
F^OOr^rre^cchha^iidd
Client Side
PaPckaect
FaFbarbic
10/100
10/100
10/100
SFI4.1
SFI4.2
XSBI
XAUI
Line IF
16@622M
4@2.5G
16@644M
4@3.125G
How to reach us:
http://www.infineon.com
Published by
Infineon Technologies AG,
St.-Martin-Strasse 53,
D-81669 München
© Infineon Technologies AG 2003. All Rights Reserved.
Template: pb_tmplt.fm/2/2003-05-01
Attention please!
The information herein is given to describe certain components
and shall not be considered as a guarantee of characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not
limited to warranties of non-infringement, regarding circuits,
descriptions and charts stated herein.
Information
For further information on technology, delivery terms
and conditions and prices please contact your nearest
Infineon Technologies Office in Germany or our
Infineon Technologies Representatives worldwide.
Published by Infineon Technologies AG
Warnings
Due to technical requirements components may contain dan-
gerous substances. For information on the types in question
please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-
support devices or systems with the express written approval
of Infineon Technologies, if a failure of such components can
reasonably be expected to cause the failure of that life-support
device or system, or to affect the safety or effectiveness of that
device or system. Life support devices or systems are intended
to be implanted in the human body, or to support and/or main-
tain and sustain and/or protect human life. If they fail, it is rea-
sonable to assume that the health of the user or other persons
may be endangered.
Ordering No. B115-H8198-X-X-7600
Printed in Germany
PS 05032.
R&L