LH1526AB Datasheet, PDF (2/6 Pages) Infineon Technologies AG – Dual 1 Form A Solid-State Relays

Recommended Operating Conditions
120
100
80
60
40 ^{IF = 0.3 mA}
IF = 1.0 mA
IF = 1.5 mA
20 IF = 2.0 mA
IF = 2.25 mA
TO 20 mA
0
–40 –20
0
20
40
60
80
AMBIENT TEMPERATURE, TA (°C)
Absolute Maximum Ratings, T_A=25°C (except where noted)
Stresses in excess of the absolute Maximum Ratings can cause permanent
damage to the device. These are absolute stress ratings only. Functional opera-
tion of the device is not implied at these or any other conditions in excess of
those given in the operational sections of this document. Exposure to absolute
Maximum Ratings for extended periods of time can adversely affect reliability.
Ambient Operating Temperature Range, T_A................... –40° to +85°C
Storage Temperature Range, T_stg................................. –40° to +150°C
Pin Soldering Temperature, t=10 s max, T_S ................................ 260°C
Input/Output Isolation Voltage, t=1.0 s, V_ISO........................5300 V_RMS
LED Input Ratings:
Continuous Forward Current, I_F...............................................50 mA
Reverse Voltage, V_R................................................................... 8.0 V
Output Operation (each channel)
dc or Peak ac Load Voltage, I_L≤50 µA, V_L ................................. 400 V
Continuous dc Load Current, I_L
Unidirectional Operation
Pins 4, 6 (+) to Pin 5 (–)..........................................................250 mA
Two Pole Operation, I_L ..............................................................100 mA
Power Dissipation, P_DISS......................................................... 600 mW
Electrical Characteristics, T_A=25°C
Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result
of engineering evaluations. Typical values are for information purposes only and are not part of the testing requirements.
Parameter
Symbol Min.
Typ.
Max.
Unit
Test Condition
Input
LED Forward Current for Switch Turn-on
LED Forward Current for Switch Turn-off
LED Forward Voltage
Output
I_Fon
—
0.3
0.5
mA
I_Foff
0.01
0.1
—
mA
V_F
0.80
1.15
1.40
V
I_L=100 mA, t=10 ms
V_L=±350 V, t=100 ms
I_F=1.5 mA
ON-resistance:
ac/dc, each pole
OFF-resistance
Current Limit
Output Off-state Leakage Current
Output Capacitance
Switch Offset
Transfer
R_ON
17
25
36
Ω
I_F=1.5 mA, I_L=±50 mA
R_OFF
—
5000
—
GΩ
I_F=0 mA, V_L=±100 V
I_LMT
170
210
270
mA
I_F=1.5 mA, t=5.0 ms
V_L=7.0 V
—
—
0.04
200
nA
I_F=0 mA, V_L=±100 V
—
—
1.0
µA
I_F=0 mA, V_L=±400 V
—
—
37
—
pF
I_F=0 mA, V_L=1.0 V
—
13
—
pF
I_F=0 mA, V_L=50 V
—
—
0.25
—
µV
I_F=5.0 mA
Input/Output Capacitance
Turn-on Time
Turn-off Time
C_ISO
—
t_on
—
—
t_off
—
—
0.8
—
pF
V_ISO=1.0 V
1.00
—
ms
I_F=1.5 mA, I_L=50 mA
0.5
1.0
ms
I_F=5.0 mA, I_L=50 mA
0.20
—
ms
I_F=1.5 mA, I_L=50 mA
0.4
0.9
ms
I_F=5.0 mA, I_L=50 mA
 2001 Infineon Technologies Corp. • Optoelectronics Division • San Jose, CA
www.infineon.com/opto • 1-888-Infineon (1-888-463-4636)
3–115
LH1526AB/AAC/AACTR
March 26, 2000-17