ICE3BR1465JF Datasheet, PDF (19/36 Pages) Infineon Technologies AG – Off-Line SMPS Current Mode Controllerwith integrated 650V CoolMOS® and Startup cell (frequency jitter Mode) in FullPak

CoolSET^®-F3R
ICE3BR1465JF
Electrical Characteristics
4 Electrical Characteristics
Note: All voltages are measured with respect to ground (Pin 5). The voltage levels are valid if other ratings are
not violated.
4.1
Absolute Maximum Ratings
Note: Absolute maximum ratings are defined as ratings, which when being exceeded may lead to destruction
of the integrated circuit. For the same reason make sure, that any capacitor that will be connected to pin 4
(VCC) is discharged before assembling the application circuit.T_a=25°C unless otherwise specified.
Parameter
Symbol
Drain Source Voltage, limited by max. V_DS
T_j=150°C and I_AR
Switching drain current, pulse width t_p I_s
limited by max. T_j=150°C
Pulse drain current, pulse width t_p
limited by max. T_j=150°C
I_{D_Puls}
Avalanche energy, repetitive t_AR limited E_AR
by max. T_j=150°C¹⁾
Avalanche current, repetitive t_AR limited I_AR
by max. T_j=150°C¹⁾
VCC Supply Voltage
V_VCC
FB Voltage
V_FB
BA Voltage
V_BA
CS Voltage
V_CS
Junction Temperature
T_j
Storage Temperature
T_S
Thermal Resistance
Junction -Ambient
R_thJA
Thermal Resistance
Junction -case
R_thJC
Soldering temperature, wavesoldering T_sold
only allowed at leads
Power dissipation, T_c=25°C
P_tot
Limit Values Unit
min. max.
-
650
V
-
4.5
A
-
8.2
A
-
0.12 mJ
-
1.9
A
-0.3
27
V
-0.3
5.5
V
-0.3
5.5
V
-0.3
5.5
V
-40
150
°C
-55
150
°C
-
82
K/W
-
4.8
K/W
-
260
°C
-
26
W
Remarks
I_D= 1.9A
Controller & CoolMOS^®
1.6mm (0.063 in.) from
case for 10s
ESD Capability (incl. Drain Pin)
V_ESD
-
2
kV
Human body model²⁾
Mounting torque
60
Ncm M2.5 screws
1) _{Repetitive avalanche causes additional power losses that can be calculated as PAV=EAR*f}
2) _{According to EIA/JESD22-A114-B (discharging a 100pF capacitor through a 1.5kW series resistor)}
Version 2.1
19
7 May 2011