English
Language : 

BTS3028SDR Datasheet, PDF (18/22 Pages) Infineon Technologies AG – Smart Low Side Power Switch
HITFET - BTS3028SDR
Smart low side power switch
Protection Functions
For maximum single avalanche energy please also refer to EAS value in “Energies” on Page 7
100,00
Vbat = 24V
10,00
Max .
1,00
0,10
1
10
Figure 15
ID [ A ]
Maximum load inductance for single pulse
L=f (IL), Tj(start)= 150 °C, Vbat= 24V
100
EAS_3028.emf
6.3
Short Circuit Protection
The condition short circuit is an overload condition of the device. If the current reaches the limitation value of ID(lim)
the device limits the current and starts heating up. When the thermal shutdown temperature is reached, the device
turns off.
The time from the beginning of current limitation until the over temperature switch off depends strongly on the
cooling conditions.
The device sinks higher current on IN pin during the protective switch off and switches back ON after the
BTS3028SDR cools down below the temperature hysteresis .
Figure 16 shows this behavior.
Datasheet
18
Rev. 1.0, 2009-12-06