1EDI05I12AF Datasheet, PDF (17/22 Pages) Infineon Technologies AG – Separate output variant for IGBT

5.3.4 Short Circuit Clamping
1EDI EiceDRIVER™ Compact
Separate output variant for IGBT
Electrical Parameters
Table 7 Short Circuit Clamping
Parameter
Symbol
Min.
Clamping voltage (OUT+) V_CLPout
–
(V_OUT - V_VCC2)
Values
Unit
Typ.
Max.
0.9
1.3
V
5.3.5 Dynamic Characteristics
Dynamic characteristics are measured with V_VCC1 = 5 V and V_VCC2 = 15 V.
Table 8 Dynamic Characteristics
Parameter
Symbol
Min.
Input IN to output propa- T_PDON
270
gation delay ON
Input IN to output propa- T_PDOFF
270
gation delay OFF
Input IN to output propa- T_PDISTO -30
gation delay distortion
(T_PDOFF - T_PDON)
Input pulse suppression T_MININ+, 230
IN+, IN-
T_MININ-
Input IN to output
T_PDONt
–
propagation delay ON
variation due to temp
Input IN to output
T_PDONt
–
propagation delay OFF
variation due to temp
Input IN to output
propagation delay
T_PDISTOt
–
distortion variation due to
temp (T_PDOFF-T_PDON)
Rise time
T_RISE
10
Values
Unit
Typ.
Max.
300
330
ns
300
330
ns
5
40
ns
240
–
ns
–
tbd
ns
–
tbd
ns
–
tbd
ns
18
30
ns
Fall time
T_FALL
10
20
30
ns
1) The parameter is not subject to production test - verified by design/characterization
Note /
Test Condition
IN+ = High,
IN- = Low,
OUT = High
I_OUT = 500 mA
pulse test,
t_CLPmax = 10 μs)
Note /
Test Condition
C_LOAD = 100 pF
V_IN+ = 50%,
V_OUT=50% @ 25°C
–
1)_{CLOAD = 100 pF}
V_IN+ = 50%,
V_OUT=50%
1)_{CLOAD = 100 pF}
V_IN+ = 50%,
V_OUT=50%
1)_{CLOAD = 100 pF}
V_IN+ = 50%,
V_OUT=50%
C_LOAD = 1 nF
V_L 20%, V_H 80%
C_LOAD = 1 nF
V_L 20%, V_H 80%
Preliminary Data Sheet
17
Rev. 1.00, 2013-11-20