ICE1PCS02 Datasheet, PDF (14/18 Pages) Infineon Technologies AG – Standalone Power Factor Correction (PFC) Controller in Continuous Conduction Mode (CCM) with Input Brown-Out Protection

CCM-PFC
ICE1PCS02/G
Electrical Characteristics
4.3.3 System Protection Section
Parameter
Open Loop Protection (OLP)
VSENSE Threshold
Peak Current Limitation (PCL)
ISENSE Threshold
Soft Over Current Control (SOC)
ISENSE Threshold
Output Over-Voltage Protection (OVP)
Symbol
V_OLP
Limit Values
min. typ. max.
0.77 0.81 0.86
Unit Test Condition
V
V_PCL -1.15 -1.08 -1.00 V
V_SOC -0.79 -0.73 -0.66 V
V_OVP 5.12 5.25 5.38 V
Input Brown-out Protection (IBOP)
High to Low Threshold
Input Brown-out Protection (IBOP)
Low to High Threshold
Input Brown-out Protection (IBOP)
VINS Bias Current
V_VINSL 0.76 0.82 0.88 V
V_VINSH 1.40 1.50 1.60 V
I_VIN0V
-1.0 -0.2
0
µA V_VINS= 0V
4.3.4 Current Loop Section
Parameter
OTA2 Transconductance Gain
OTA2 Output Linear Range¹⁾
Symbol
Limit Values
Unit Test Condition
min. typ. max.
Gm_OTA2 0.75 0.95 1.15 mS At Temp = 25°C
I_OTA2
+/- 50
µA
ICOMP Voltage during OLP
V_{I C O M P F}
3.6
4.0
V V_VSENSE= 0.5V
1) _{The parameter is not subject to production test - verified by design/characterization}
Version 1.1
14
28 Dec 2004