EVAL3DS01G28W Datasheet, PDF (14/15 Pages) Infineon Technologies AG – 28W-LCD – Monitor SMPS Evaluation Board with ICE3DS01G

LCD Monitor SMPS Evaluation Board with ICE3DS01G
Change service
Revision History
Application Note EVAL3DS01G28W
Actual Release: V1.2 Date:11.08.2010
Previous Release: V1.1
Page of Page of Subjects changed since last release
actual prev. Rel.
Rel.
---------- Change
to
EVAL3DS01G28W
15
15 Part List
For questions on technology, delivery and prices please contact the Infineon
Technologies Offices in Germany or the Infineon Technologies Companies and
Representatives worldwide: see the address list on the last page or our webpage at
http://www.infineon.com
CoolMOS and CoolSET are trademarks of Infineon
Technologies AG.
We listen to Your Comments
Any information within this dokument that you feel is wrong, unclear or missing at all?
Your feedback will help us to continously improve the quality of this dokument.
Please send your proposal (including a reference to this dokument) to:
[e-mail]
Edition 2010-08-11
Published by Infineon Technologies AG,
St.-Martin-Strasse 53,
D-81541 München
© Infineon Technologies AG 2000.
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as warranted characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts
stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in
Germany or our Infineon Technologies Representatives worldwide (see address list).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your
nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon
Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the
safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support
and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be
endangered.
www.Infineon.com/CoolSET
Page 13 from 15
EVAL3DS01G28W
V1.2