BGM15HA12 Datasheet, PDF (14/21 Pages) Infineon Technologies AG – High-Band LNA Multiplexer Module

BGM15HA12
V_TPmax
SCLK
V_TPmin
V_OHmin
SDATA
V_OLmax
T_D
T_SDATAOTR
Figure 5: Bus active data transmission timing specification
T_D
T_SDATAOTR
VIO (V)
VIO_max
VIO_min
Not To Scale
SCLK & SDATA must be
held at low level from
deassertion of VIO until
the end of T_SIGOL
T_SIGOL
All slave registers
set/reset to
manufacturer‘s
defaults
V_VIO-RST
(0.2V)
T_VIO-RST
Figure 6: Requirements for VIO-initiated reset
T_VIO-R
Time
Table 11: Register Mapping
Register
Address
0x0000
0x001D
0x001E
Register Name
REGISTER_0
PRODUCT_ID
Data
Bits
7:0
7:0
Function
MODE_CTRL
PRODUCT_ID
MANUFACTURER_ID 7:0 MANUFACTURER_ID [7:0]
Description
Module control
This is a read-only register. However,
during the programming of the USID
a write command sequence is per-
formed on this register, even though
the write does not change its value.
This is a read-only register. However,
during the programming of the USID,
a write command sequence is per-
formed on this register, even though
the write does not change its value.
Default Broadcast_ID Trigger R/W
Support
Support
00000000
No
Yes
R/W
11010011
No
No
R
00011010
No
No
R
Continued on next page
Data Sheet
14
Revision 3.0 - 2015-07-24