TLI4963-1M_16 Datasheet, PDF (13/17 Pages) Infineon Technologies AG – High Precision Hall Effect Latch for 5V Applications

TLI4963-1M
Specification
3) Systematic delay between magnetic threshold reached and output switching.
4) Time from applying V_DD = 3.0 V to the sensor until the output is valid.
Table 7 Magnetic Characteristics
Parameter
Symbol T (°C)
Values
Unit Note / Test
Min. Typ. Max.
Condition
Operating point
B_OP
-40
0.6
2.2 3.7 mT
25
0.5
2.0 3.5
125
0.3
1.7 3.1
Release point
B_RP
-40
-3.7 -2.2 -0.6 mT
25
-3.5 -2.0 -0.5
125
-3.1 -1.7 -0.3
Hysteresis
B_HYS
-40
2.8
4.4 5.7 mT
25
2.6
4.0 5.4
125
2.2
3.4 4.6
Effective noise value of the B_Neff
25
magnetic switching points¹⁾²⁾
39
μT
Temperature compensation of T_C
magnetic thresholds²⁾
-1500
ppm/
K
1) The magnetic noise is normal distributed and can be assumed as nearly independent to frequency without sampling
noise or digital noise effects. The typical value represents the rms-value and corresponds therefore to a 1 σ
probability of normal distribution. Consequently a 3 σ value corresponds to 0.3% probability of appearance.
2) Not subject to production test, verified by design/characterization.
Field Direction Definition
Positive magnetic fields are defined with the south pole of the magnet to the branded side of package.
N
S
Branded Side
Figure 8 Definition of Magnetic Field Direction PG-SOT23-3-15
Data Sheet
13
Revision 1.0, 2016-01-11