|
V23848-N305-C56 Datasheet, PDF (12/29 Pages) Infineon Technologies AG – iSFP-Intelligent Small Form-factor Pluggable 2.5 Gbit/s InfiniBand 1X-SX Multimode 850 nm Transceiver with LC Connector | |||
|
◁ |
V23848-N305-C56
Technical Data
Optical Characteristics (VCC = 2.97 V to 3.63 V, TC = â20°C to 85°C)
Parameter
Symbol
Values
Unit
Transmitter
Optical Modulation Amplitude
Launched Power (Average)1)
Extinction Ratio (Dynamic)
OMAT
PO
ER
min.
196
â8.5
9
typ.
â6
14.5
max.
â4
µW
dBm
dB
Center Wavelength
Spectral Width (rms)
Relative Intensity Noise
λC
830
850
860
nm
ÏI
0.15
0.85
nm
RIN
â117
dB/Hz
Tx Disable Laser Output Power PO-TxDis
Contributed Deterministic Jitter2) CDJTx
Contributed Total Jitter3)
CTJTx
Jitter (pk-pk)4)
JTx
Rise Time5)
tR-Tx
Fall Time5)
tF-Tx
Receiver6)
â50
dBm
52
ps
122
ps
ps
150
ps
150
ps
Optical Modulation Amplitude OMAR 50
µW
Sensitivity (Average Power)7) PIN
â16
dBm
Average Received Power
PIN-R
â1.5
dBm
LOS Assert Level8)
PLOSA
â30
â28
dBm
LOS Deassert Level8)
PLOSD
â25
â20
dBm
LOS Hysteresis8)
PLOSA
1
2
dB
âPLOSD
Input Center Wavelength
λC
770
850
860
nm
Optical Return Loss
ORL
12
dB
1) Into multimode fiber, 62.5 µm or 50 µm diameter.
2) Deterministic Jitter is that jitter measured by a bathtub scan, using a 27â1 NRZ PRBS, and extrapolating to
1 BER.
3) Total Jitter is that jitter measured by a bathtub scan, using a 27â1 NRZ PRBS, and extrapolating to 1x10â12 BER.
4) Jitter (pk-pk) is measured using a 223â1 NRZ PRBS and a Digital Communications Analyzer.
5) Values are 20% - 80%. Measured at nominal data rate, unfiltered, using an O/E plug-in with a bandwidth of
2.85 GHz or higher.
6) Receiver characteristics are measured with a worst case reference laser.
7) Average optical power at which the BER is 1x10â12. Measured with a 223â1 NRZ PRBS and ER = 9 dB.
8) See Figure 3.
Preliminary Product Information
12
2004-06-28
|
▷ |