|
V23838-M305-M56 Datasheet, PDF (12/21 Pages) Infineon Technologies AG – SFP-Small Form-factor Pluggable 1.25 Gigabit Ethernet 2.125/1.0625 Gbit/s Fibre Channel Multimode 850 nm Transceiver with LC™ Connector | |||
|
◁ |
V23838-M305-M56
Technical Data
Optical Characteristics (VCC = 2.97 V to 3.63 V, TC = â20°C to 85°C) (contâd)
Parameter
Symbol
Values
Unit
min.
typ.
max.
LOS Deassert Level11)
LOS Hysteresis11)
Input Center Wavelength
Optical Return Loss
PLOSD
â25
â20
dBm
PLOSA
1
2
dB
âPLOSD
λC
770
850
860
nm
ORL
12
dB
1) Fibre Channel PI Standard. Typical OMA values based on â6 dBm launched power (average) and 15 dB
extinction ratio.
2) Into multimode fiber, 62.5 µm or 50 µm diameter.
3) Deterministic Jitter is that jitter measured by a bathtub scan, using a 27â1 NRZ PRBS, and extrapolating to
1 BER.
4) Total Jitter is that jitter measured by a bathtub scan, using a 27â1 NRZ PRBS, and extrapolating to 1x10â12 BER.
5) Jitter (pk-pk) is measured using a 27â1 NRZ PRBS and a Digital Communications Analyzer.
6) Values are 20% - 80%. Measured at nominal data rate, unfiltered, using an O/E plug-in with a bandwidth of
2.85 GHz or higher. Complies with FC 1x, FC 2x and Gigabit Ethernet eye mask when filtered.
7) Receiver characteristics are measured with a worst case reference laser.
8) Fibre Channel PI Standard.
9) Average optical power at which the BER is 1x10â12. Measured with a 27â1 NRZ PRBS and ER = 9 dB.
10) Measured at the given Stressed Receiver Eye Closure Penalty and DCD component given in Fibre Channel
PI Standard (2.03/2.18 dB & 40/80 ps).
11) See Figure 3.
LOS Assert
(Minimum)
Hysteresis
(Minimum)
LOS Deassert
(Maximum)
1
LOS Level
0
Figure 3
Data Sheet
LOS / Hysteresis
(Typical)
12
Received Optical
Power Level
[dBm]
File: 1522
2004-06-23
|
▷ |