TLE4998C8D Datasheet, PDF (12/28 Pages) Infineon Technologies AG – High Performance Programmable Dual Linear Hall Sensor

TLE4998C8D Grade1
Maximum Ratings
3
Maximum Ratings
All further given descriptions are regarded to each of the implemented sensors IC’s, or otherwise noted.
Table 3-1
Absolute Maximum Ratings
Parameter
Symbol
Values
Unit Note / Test Condition
Min. Typ. Max.
Junction temperature
T_J
Voltage on V_DD pin with respect to
V_DD
ground
- 40 –
-18 –
140
°C
–
18.35 V
1)2)
Supply current @ overvoltage V_DD max. I_DDov
Reverse supply current @ V_DD min.
I_DDrev
Voltage on output pin with respect to
ground
V_OUT
–
–
-1
–
-1³⁾ –
15
mA –
0
mA –
18.35⁴⁾ V
–
Magnetic field
B_MAX
-
–
1
T
–
ESD protection
V_ESD
-2
-
+2
kV
According HBM
JESD22-A114-B⁵⁾
1) Higher voltage stress than absolute maximum rating, e.g. 150% in latch-up tests is not applicable. In such cases, R_series
≥100 Ω for current limitation is required.
2) Max 1h, in operating temperature range.
3) I_DD can exceed 10 mA when the voltage on OUT is pulled below -1 V (-5 V at room temperature).
4) V_DD = 5 V, open drain permanent low, for max. 10 minutes
5) 100 pF and 1.5 kΩ
Technical Product Description
12
Revision 1.0, 2014-05-21