TLE4997A8D Datasheet, PDF (12/19 Pages) Infineon Technologies AG – Programmable Linear Dual Hall Sensor

TLE4997A8D Grade1
Operating Range
4
Operating Range
The following operating conditions must not be exceeded in order to ensure correct operation of the TLE4997A8D
Grade1. All parameters described in the following sections refer to these operating conditions if applicable or
unless otherwise indicated.
Table 4-1
Operating Range
Parameter
Symbol
Min.
Supply voltage
V_DD
4.5
4¹⁾
Output current
Load resistance
I_OUT
-1
R_L
10
10
Load capacitance
C_L
0
Junction temperature³⁾ T_J
- 40
1) May have reduced EMC robustness.
2) For V_OUT within the range of 5% ... 95% of V_DD.
3) R_THja ≤ 150 K/W.
Values
Typ. Max.
–
5.5
–
7
–
1
–
–
–
–
–
210
–
140
Unit Note / Test Condition
V
V
Extended range
mA
2)
kΩ Pull-down to GND
Pull-up to V_DD
nF
°C
Example for profil see Table 4-2
Note: Keeping signal levels within the limits described in this table ensures operation without overload conditions.
Table 4-2
Example for Ambient Temperature Profile ¹⁾
Temperature /°C
Active Lifetime / h
-40°C ..<20°C
100
20°C .. <60°C
600
60°C .. <90°C
8000
90°C .. <110°C
2000
110°C .. <125°C
1000
125°C
300
1) This lifetime statement is an anticipation based on an extrapolation of Infineon’s qualification test results.
Technical Product Description
12
Revision 1.0, 2014-05-21