TLE4117 Datasheet, PDF (12/17 Pages) Infineon Technologies AG – Voltage Regulator

TLE 4117
Characteristics 5 V Fixed Output Voltage Device TLE 4117 D V50
0 °C < T_j < 125 °C; C_Q = 10 µF, I_Q = 10 mA; unless otherwise specified.
Parameter
Symbol
Limit Values
Unit Measuring Conditions
min. typ. max.
Output voltage V_Q
Output voltage V_Q
Line regulation ∆V_Q
Load regulation ∆V_Q
Temperature
∆V_Q
Stability
4.9 5.0 5.1 V
V_I = 7 V, I_Q = 10 mA,
T_j = 25 °C
4.8 5.0 5.2 V
6.5 V ≤ V_I ≤=10 V
0 ≤ I_Q ≤ 800 mA
–
10 50 mV 6.5 V ≤ V_I ≤ 15 V
I_Q = 0 mA
–
10 50 mV V_I = 6.5 V
1 mA ≤ I_Q ≤ 800 mA
–
1.0 –
%
1)
Long Term
Stability
∆V_Q
–
0.3 –
%
1000 h, T_j = 125 °C¹⁾
Quiescent current I_q
–
1
2
mA V_I < 15 V
Output current
I_{Q max}
800 –
–
mA T_j = 25 °C; V_I < 26 V
Minimum Load
I_{Q min}
–
–
0
mA
Current
Drop voltage
V_Dr
–
1
1.1 V
I_Q = 100 mA²⁾
Drop voltage
V_Dr
–
1.05 1.15 V
I_Q = 500 mA²⁾
Drop voltage
V_Dr
–
1.1 1.2 V
I_Q = 800 mA²⁾
Power Supply
PSRR 60 65 –
Ripple Rejection
dB f_r = 120 Hz, T_j = 25 °C
V_r = 0.5 V_PP, V_I = 5 V
1) _{Guaranteed by Design.}
2) _{Measured when output voltage dropped 100 mV below nominal voltage.}
Note: The listed characteristics are ensured over the operating range of the integrated
circuit. Typical characteristics specify mean values expected over the production
spread. If not otherwise specified, typical characteristics apply at T_A = 25 °C and
the given supply voltage.
Target Data Sheet Rev. 0.1
12
2000-05-26